Comnet CWGE2FE8MSPOE Información técnica descargar pdf (Pagina 63)

DHCP Server Configuration

The system provides the DHCP server function. By enabling the DHCP server function,

the switch system will be a DHCP server.

 DHCP Server: Enable or Disable the DHCP Server function. Enable:—the switch will

be the DHCP server on your local network

 Low IP Address: The dynamic IP range. Low IP address is the beginning of the

dynamic IP range. For example: dynamic IP range is from 192.168.1.100 ~

192.168.1.200. In contrast, 192.168.1.100 is the Low IP address

 High IP Address: The dynamic IP range. High IP address is the end of the dynamic

IP range. For example: dynamic IP range is from 192.168.1.100 ~ 192.168.1.200. In

comparison, 192.168.1.200 is the High IP address

 Subnet Mask: The dynamic IP assign range subnet mask

 Gateway: The gateway in your network

 DNS: The IP Address of the Domain Name Server in your network

 Lease Time (sec): It is the time period that system will reset the dynamic IP

assignment to ensure the dynamic IP will not been occupied for a long time or the

server doesn’t know that the dynamic IP is idle

DHCP Server Configuration interface

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 142 143

Sin comentarios

Comnet CWGE2FE8MSPOE Información técnica Pagina 63